top of page

​​Label Dispensers

​​​​​​​​​​Bottle Label Applicators


10" or 16" width Cylinder Labeling Machine

Bottle-Matic Bottle Label Applicator

Bottle-Matic is the perfect label applicator machine for labeling your cylindrical objects.  It can wrap your bottles, cans, tubes, and jars by simply pressing the foot-switch.  Bottle-Matic can even label tapered objects easily.  Bottle-Matic bottle label applicators enable the user to label all kinds of cylindrical objects by simply inserting the container and pressing a foot switch. Once the foot switch is activated the label is applied at over 4.5″ per second, most water bottles are labeled in less than 2 seconds! This allows the user to quickly remove the bottle and insert another to start the procedure again. Once a rhythm is established bottles are labeled VERY quickly.

​ Labels any cylindrical object fast and accurately - front and back - from 0.5" to 8" diameter at speeds of 1200 pieces per hour
  • Label objects from .5″ to 10″ diameter. From a Test Tube to a 1.5 gallon bottle

  • ACCURATE: Holds 1/64th” side-side accuracy on most containers

  • Label cylinders to 15″ length (or longer if the item has a neck)

  • Able to handle most tapered containers by simply adjusting the idle roller position

  • ​Labels over 1000 pcs per hour with average dexterity. (more if you have a fast employee)

  • Side frames: Laser-Cut from the drawing quality steel then formed, countersunk, de burred, and inspected one at a time at our facility

  • Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within .001″ using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action)

  • Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate.

  • Bottle-Matic uses DUAL AC shaded pole gear motors

  • ​Micro-Switch activated, will work on all kinds of labels.

bottom of page